Takiya

KOREDER LINE

  • TOP
  • PICTURE RAIL
  • USAGE

Safe Load Standards

Safe Load Standards

According to our testing results, we set our safe load standards at one third of the maximum overload. This is to protect your valuable works from unexpected incidents (e.g. operational accidents, disasters such as earthquakes and fire).

Importance of Proper Installation

If the safe load of a combination of a rail, hook, and wire is 50kg, two wires may be able to hold a 100kg exhibit. However, a load could become unbalanced while installing. For example, if a person looses his grip or hangs one wire after another it could exceed the safe load weight of the one wire and cause problems. Therefore, we recommend that you do not exceed 50kg even if you have two wires.

Load under normal circumstances

Applied load to the each rail, hook and wire is 25kg, half of 50kg, under the normal circumstances.

Load when the hanged work swings caused by the earthquakes and so on.

Applied load to one of the rail, hook and wire becomes more than 25kg, half of 50kg, because of the bias.

Load when the force goes to one wire, because of some trouble.

Applied load to one of the rail, hook and wire becomes 50kg.

Ideal Exbition

Displaying Multiple Items

Intervals required between multiple articles are determined by their size and weight. Please leave enough space between articles to prevent collision in case of an earthquake or other natural disaster. It is recommended that at least three feet separate each picture.

The limit for the number of articles one rail can hold is determined by the length of the rail. Each article should be hung from a Hanger located near the screws that connect the Picture Rail to the wall, so there should be no more items than there are screws.

hook・ runnerの取扱い方法

There are several types of hooks and runners in accordance with the rail. Please select the appropriate one according to their functions.

Handling instructions of push fixing hook

Insert the hook pushing along the picture rail groove, and rotate 90° to fix into the rail. The hook is fixed by the built-in spring. Make sure the hook does not turn.

Insert the hook pushing along the picture rail groove, and rotate 90° to fix into the rail. The hook is fixed by the packing attached to the hook head. Make sure the hook does not turn.

適用 hook
  • A free hook(70Kg)
  • A one-touch hook(70Kg)
  • CA hook(30Kg)
  • CA one-touch hook(30Kg)
  • Mini one-touch A hook(15Kg)
  • Mini A hook(15Kg)
  • G2 Hook(8Kg)

Handling instructions of push-tightening hook

Loosen the screw of the hook top, insert the hook pushing along the picture rail groove, and rotate 90° to fix into the rail. The hook is fixed by the built-in spring. Tighten the screw of the hook top in order to fix completely. Make sure the hook does not turn.

適用 hook
  • H free hook(100Kg)
  • Safety H Hanger set(100Kg)
  • M free hook(50Kg)
  • M one-touch hook(50Kg)

Handling instructions of free hook

Insert the hook along the picture rail groove, and rotate 90° to fix into the rail.

適用 hook
  • L free hook(100Kg)
  • Safety L Hanger set(100Kg)
  • D free hook(70Kg)
  • D one-touch hook(70Kg)
  • I free hook(70Kg)
  • I one-touch hook(70Kg)
  • J free hook(70Kg)
  • J one-touch hook(70Kg)
  • CB hook(30Kg)
  • Mini D free hook(25Kg)
  • Mini one-touch B hook(15Kg)
  • Mini D Hanger set(15Kg)
  • Safety MiniD Hanger set(15Kg)

Handling instructions of runner hook

Remove the lid from the runner rail and open the slot. Put the runner into the rail through the slot. After inserting the runner, close the slot with the lid. Cover the lid tightly secured to the rail.
※ The runner rail slot of J-1 and J-2 rail opens by sliding the round lid (by screw) along the rail groove.

適用 hook
  • A free runner
  • A one touch runner
  • AB free runner
  • AB one touch runner
  • J free runner
  • J one touch runner
  • MS free runner
  • MS one touch runner

Handling instructions of sliding hook

Insert the hook from the picture rail end, and slide the hook to fix the position.
※ The runner rail slot of H-1 rail opens by sliding down the round lid (by spring) along the rail

適用 hook
  • H Slide hook(100Kg)
  • Safety H Slide Hanger set(100Kg)
  • KA hook(10Kg)
  • KB hook(10Kg)
  • G2 Slide hook(8Kg)

Hanger setの取扱い方法

There are several types of hanger set in accordance with the hook and runner.
Please select the appropriate one according to their functions.

Handling instruction of connecting Hanger set A to Hook

Set the wire loop of Hanger set A to the hook or the hook part of the runner.
※ We recommend to wear the safety stopper for fixation of the wire loop, SL4 and SL5 (sold separately) in order to prevent slipping out.

適用 hook
  • H free hook
  • L free hook
  • A free hook
  • A free runner
  • AB free runner
  • D free hook
  • MiniD free hook
  • J free hook
  • J free runner
  • I free hook
  • M free hook
  • MS free runner
  • CA hook
  • CB hook
  • MiniA hook
  • KA hook
  • KB hook
  • G2 hook
  • G2 Slide hook

Handling instruction of connecting Hanger set B to Hook

Insert the wire into the top pin plug of the one-touch hook, and the wire is locked.

[Attach the wire]
Insert the wire strongly into the top pin plug of the one-touch hook until the wire hit the back. The wire is locked as it is. (Please do not push the pin up at the time of inserting.)

[Revome the wire]
Push up the top pin of the one-touch hook and take down the wire.

適用 hook

Wire φ1.2mm

  • Mini one touchA hook
  • Mini one touchB hook

Wire φ1.5mm

  • CA one touch hook

Wire φ2.0mm

  • M one touch hook
  • MS one touch runner

Wire φ2.5mm

  • A one touch hook
  • A one touch runner
  • AB one touch runner
  • D one touch hook
  • I one touch hook
  • J one touch hook
  • J one touch runner

Handling instruction of adjusting the height of hanger

Loosen the cap pin of the hanger (except mini-hanger), insert the wire into the cap pin. Hold the wire from the hook part by one hand, push down the cap pin to adjust the height of the hanger by another. Release the cap pin, then the hanger is locked. Please be sure to tighten the cap pin when the hanger position is fixed (except mini-hanger).
(note) The pin of Mini-hanger is operated by spring system (not as the cap pin with the screw system), and may fall down when you touch it. Please do not touch while hanging something.